Tampilkan postingan dengan label canon. Tampilkan semua postingan
Tampilkan postingan dengan label canon. Tampilkan semua postingan

Jumat, 21 Januari 2011

canon MP760 service manual



Mungkin Anda kebingungan cara membongkar printer jenis ini. Di sini akan saya share service manual dari printer canon MP760, yang memuat cara2 instal, error code, trobleshooting dan bongkar pasangnya. silahkan downlod di sini

Selasa, 18 Januari 2011

Macam-macam error MP258 / code error canon MP258


Macam-macam error MP258 / code error canon MP258

Sekian lama tidak posting karena kesibukan di dunia nyata, akhirnya gagakhitam kangen juga untuk posting. Kali ini saya akan posting error kode pada printer Canon MP258.

Kode Error Canon MP258 dan Cara Mengatasinya :

Ada 2 jenis kode error pada printer jenis ini yaitu yang menggunakan huruf depan E dan huruf depan P
1. berhuruf depan E misalnya E16
2. berhuruf depan P misalnya P02


Kode Error E canon MP258
:

E04 : Catridge canon MP258 tidak terpasang dengan baik.
Solusi : Ambil catridge, trus pasang lagi

E05 : Catridge canon MP258 tidak terpasang dengan baik atau salah satu catrid ada yg rusak
Solusi :
1. Ambil catridge, trus pasang lagi
2. Ganti catridge jika ada yg rusak

E14 dan E15 : Catridge canon MP258 tidak terpasang dengan baik.
Solusi : Ambil catridge, trus pasang lagi

E13 dan E16: Ink has run out / catridge minta di reset.
Solusi :
Tekan tombol STOP / Reset selama 5 - 15 detik tunggu sampai led display berproses.
gambar seperti dibawah ini :




Kode Error P Canon MP258 :
P02 (Carriage error)
Solusi :
- Pastikan tidak ada benda asing yg nyangkut di roll printer, dan saya sering menemukan benca asing di sini seperti uang,peniti,dsb.
- Bersihkan dan cek encodernya, mungkin kena cipratan tinta atau pasta dari mekaniknya.



P03 (Line feed error)
Penyebab : Timing Disk kotor / rusak.
Solusi :
- Cek timing disk sensor di sebelah kiri printer, timing disk berbentuk Lingkaran bening terbuat dari plastik
- Cek dan bersihkan boardnya



P05 (ASF sensor error)
Penyebab : sensor pendeteksi kertas Canon MP258 Error.
Solusi :
Coba ganti salah satu spare part berikut ini :
-ASF / PE sensor unit.
- Motor .
- Board Printer Canon MP258.
P06 (Internal temperature error):
Penyebab : panas yg berlebihan di dalam printer Canon MP258.
Solusi :
- Bersihkan bagian dalam printer MP258.
- Ganti Board Printer MP258

P07 (Ink absorber full):
Penyebab : Ink Counter Full / Penuh, Printer Canon MP258 minta di reset pakai Software.
Solusi : Reset Printer Canon MP258 dengan menggunakan software

P08 (Print head temperature rise error):
Penyebab : Head terlalu panas, melebihi ambang batas, biasanya Catridge warnanya
Solusi :
Coba ganti catrid warna Printer Canon MP258.

P09 (EEPROM error)
Penyebab : EEPROM board Canon MP258 mengalami Corrupt atau rusak.
Solusi :
1. ganti Board Printer Canon MP258.

P15 (USB VBUS over current)
Penyebab : Printer kelebihan arus dari kabel USB Printer Canon MP258.
Solusi :
1. Coba Ganti Kabel USB Printer Canon MP258.
2. Jika masih rusak, ganti Board Printer Canon MP258.

P20 (Other hardware error)
Penyebab : kerusakan hardware lainnya
Solusi :
ganti Board Printer Canon MP258.

P22 (Scanner error)
Penyebab : scanner tidak berfungsi
Solusi :
1. Ganti scanner Printer Canon MP258.
2. Ganti Board Printer Canon MP258.

semoga bermanfaat

Kamis, 19 Agustus 2010

resetter canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 free download






Are you need resetter for your canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 series? gagakhitam.co.cc give for you. Before you reset your printer follow the following steps:


A. Entering into service mode

* Turn off the printer off is the printer power on. And remove the printer USB cable from your computer..
* While the printer is OFF, press and hold the Start/Stop button on the some other canon printers model press Resume/Cancel button.
* While still holding Start/Stop button or Resume/Cancel button, press and hold the POWER button.
* When the POWER LED (green light) lit, release the Start/Stop or resume/cancel button (still holding the POWER button).
* Still holding the power button, Press the Start/Stop button or resume/cancel button TWICE then Release the POWER button. Wait until LCD printer to display 0 (zero) number
* After the display is 0, attach the printer UsB cable to your computer, its will detected new device installed (its normal), now go to resetting steps

B .Download Resetter in here

Jumat, 05 Februari 2010

e-book cara refill toner dan inkjet cartridge






kalian tidak tahu gimana cara mengisi ulang inkjet cartridge dan toner printer Anda? Temukan jawabannya di e-book ini yang memuat banyak model dari tipe semua printer, seperti Brother, Canon, Compaq, Dell, Digital, Epson, Hewlett Packard (HP), Lexmark, Okidata, Pitney Bowes, Sharp, Xerox cartridges.
download di sini untuk cara refill cartridge inkjet

download di sini untuk cara refill toner

SEMOGA MEMBANTU

Resetter canon MX300




Canon Pixma MX300 is one of the Inkjet multifuction (Print, Scan, Copy, Fax) printer from Canon. Like general case of printer, after filled by ink usually ink level not full. At some cases of printer, after ink level empty, printer cannot be used to print.

Here the Solution to reset the ink level for Canon Pixma MX300 follow this steps to reset the ink level in your canon MX300.

1. Switch off the Canon MX300 and disconnect the power cable.
2. While press and hold the power button, Connect the power cable to electric socket.
3. While pressing the power button, press the “Cancel/Stop” button (red button).
4. Now release the power button and the printer turns into a kind of factory mode. Wait for 10 seconds until it says “idle”.
5. Press “>” (next button) once “Shipping Mode 3″ then Press the “OK” button. Press “OK” again for “without cleaning”.
6. A test page will print.
7. Open the cover, like you are about to change the cartridges.
8. Disconnect the power cable again without switch off the printer.
9. Take out the both cartridges.
10. Close the cover.
11. Connect the power cable and turn on the printer.
12. Now just put the cartridges back and the ink level in the canon Pixma MX300 have full again.

Kamis, 28 Januari 2010

Resetter


Resetter Canon IP1900
Pada dasarnya mereset printer seri ini sama dengan IP1800/1700.
download di sini

Resetter Canon iP1000, Canon iP1200, Canon iP1300, Canon iP1500, Canon iP1600, Canon 1700,Canon iP2200, Canon iP3000, Canon iP4200, Canon iP5200. Reseter ini sudah pernah dan sering digunakan.

Service Mode

Canon PIXMA iP1000, iP1500 Waste Ink Counter Reset

Step 1: Manual for Service mode

1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

step 2 : Using Software Resetter for Permanant

1. Reconnect the printer cable.
2. Download

* General Tools software Resetter for canon Pixma iP 1500
download di sini

* General Tools software Resetter for Canon PIXMA iP1000 Printers
download di sini
3. Run the Software Resetter and select (USB PORT)
4. Choose SET DESTINATION 1 And it should be reset.

Remark “After service mode Pls use software for permanent reset”

Canon Pixma iP1200, iP1600, iP2200 Resetter


1. Download software for Canon iP1200, iP1600, 2200 Printers.
download di sini
2. Unzip downloaded file by WinZip, 7Zip, Izarc, etc
3. Run GeneralTool.exe
4. Select the connected USB port number from USB PORT
5. Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
6. In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.

If both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters.

Resetter canon iP 1700 and iP1300

Methode 1 : Reset Hardware

1. Turn off Canon Pixma iP1700, iP1300 Printers
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the Canon Pixma iP1700, iP1300 Printers should turn off, if not, press the Power button once more.
8. Your Canon Pixma iP1700, iP1300 Printers should respond as normal

Methode 2 : Using software resetter


1. Download Software Resetter for Canon Printers iP1300 dan iP1700
download di sini
2. Ekstrak/Unrar/Unzip the Software
3. run GeneralTool.exe
4. Select USB Port where the canon ip1300 or canon ip1700 installed.
5. CLick Lock Release button
6. Select EEPROM CLEAR
7. Click Test Pattern 1 button
8. Your Canon Pixma iP1700, iP1300 Printers should respond as normal.

Resetting Ink-Waste Overflow Counter Canon Pixma iP3000, iP4000, iP5000 Printers

1. With the printer plugged in and powered off, press and hold the Resume/Cancel button, then press and hold the Power button. (DO NOT release the buttons. The LED light should be green to indicate that a function is selectable.).
2. While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.).
3. While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.).
4. When the LED light is green, press the Resume/Cancel button 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.).
5. Press the Power button. The LED lights in green, and the reset is performed. (When the operation completes, the printer returns to the menu selection mode automatically.).
6. Press the power button to exit service mode.

Note: if you accidentally press the Resume/Cancel button more than 4 times in step 4 then just press the Resume/Cancel button at least 10 times and the printer will be returned to step 4 automatically

Canon Pixma iP4200, iP5200, iP6000, iP8500 Reset Procedure

1. Turn off the Printers.
2. Hold Resume button click POWER.
3. Hold button RESUME, release POWER
4. Then press the button again twice RESUME.
5. Release all the buttons.
6. Indicator led in green and stay green.
7. Click the button 4 times RESUME, if you want to make another transaction. :

Look at the table below:

* 1 led- Orange – Service test print 1 times – Orange – Service test print
* 2 led – Green – EEPROM information print 2 times – Green – EEPROM information print
* 3 led – Orange – EEPROM initialization 3 times – Orange – EEPROM initialization
* 4 led – Green – Waste ink counter setting 4 time – Green – Waste ink counter setting
* 5 led – Orange – Destination setting (Press Power > Press Resume 3x) 5 times – Orange – Destination setting (Press Power> Press Resume 3x)
* 6 led – Green – Print head deep cleaning 6 times – Green – Print head deep cleaning
* 11-13 led – Orange, Green, Orange – Return to menu selection
* 14 led – Green – Left margin correction 14 times – Green – Left margin correction

1. Turn off the printer POWER button.

Resetter Epson Tx100 TX105unduh di sini
-Epson TX200 TX209unduh di sini
-Resetter Epson Rx590unduh di sini

Untuk seri-seri yang lain silahkan klik langsung pada serinya di bawah ini:
-RX610
-RX690
-R1900
-R1390
-R1410
-
C79
 

About Me

Baturaden, Purwokerto, Central Java, Indonesia

gagakhitam.co.cc Copyright © 2010 Powered by google