Resetter Epson stylus L200

Printer Seri ini memang diinfus hanya untuk di Indonesia. Bila anda membutuhkan reseter L200, gagakhitam.co.cc dapat memberikan secara gratis untuk para pembaca . Di website http://wasteinkpad.com/products-page/other-epson-printers/epson-stylus-l200-reset-waste-ink-pad/ reseter ini masih dijual dengan harga £4.99.

silahkan download di di sini

mohon kasih komentar kalau resetter ini dapat bekerja

Resetter EPSON MP32/T13

Bila Anda membutuhkan resetter epson MP32/T13 bisa download gratis di sini

silahkan download di
http://www.4shared.com/get/DilwJQiI/T13ME32me33.html

resetter canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 free download

Are you need resetter for your canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 series? gagakhitam.co.cc give for you. Before you reset your printer follow the following steps:


A. Entering into service mode

* Turn off the printer off is the printer power on. And remove the printer USB cable from your computer..
* While the printer is OFF, press and hold the Start/Stop button on the some other canon printers model press Resume/Cancel button.
* While still holding Start/Stop button or Resume/Cancel button, press and hold the POWER button.
* When the POWER LED (green light) lit, release the Start/Stop or resume/cancel button (still holding the POWER button).
* Still holding the power button, Press the Start/Stop button or resume/cancel button TWICE then Release the POWER button. Wait until LCD printer to display 0 (zero) number
* After the display is 0, attach the printer UsB cable to your computer, its will detected new device installed (its normal), now go to resetting steps

B .Download Resetter in here

download resetter Stylus Photo TX810FW

Resetter stylus photo TX810FW

The Epson Stylus® Photo TX810FW multifunction sets new frontiers with cutting-edge design, performance and advanced document and photo management. Satisfying the most demanding and style-conscious user, it blends an intuitive touch-panel display, wireless Ethernet, high resolution scanning, fax, duplex printing and dual paper trays for unsurpassed home or office productivity.



This printer has a print speed of better than Epson TX800FW

download link :

Resetter : in here

Driver&utilities : download

Printable brochure : download in here

You can try it.. good luck from kuli tinta not "tenaga ahli"

resetter epson tx210, tx219 free download

Beberapa hari yang lalu, teman online meminta saya untuk mengunggah resetter epson tx210. Saya telah mendapatkannya, akan tetapi belum sempat mengujinya karena belum dapat servisan model ini. Dan perlu diketahui bahwa di 2manuals.com, reseter tx210 ini masih di jual dengan harga $19,99. D sini Anda bisa mendapatkan secara gratis tis.....








Download resetter TX210 di sini

reset epson T50/T60 tanpa eror 21000068

Ketika kita mereset printer T50/60 dengan menggunakan software, terkadang akan muncul error 21000068 yang tidak dapat kita atasi, tp jangan kuatir brow... kita bisa mereset seri ini, tp cara ini tidak direkomendasikan bagi pemula, palagi kalau dah pegang solder langsung gemetaran...hheheheh
Ini tips dari Jagdish Rathore (India) dan aku telah diberikan izin untuk mempublikasikan di blog ini

1. Matikan printer, dan kemudian di buka baud2 dan tutupnya.
2. Buka PCB mainboard, kamu dapat melihat sebuah 8-pin CMOS IC. Itu limbah tinta Epson counter IC dan ditemukan pada semua printer epson.



3. Solder pin no 1,2,3,4 dengan kawat tembaga seperti ditampilkan di gambar. lalu nyalakan printer selama "20 detik"



4. Setelah 20 detik matikan printer dan lepas solder kawat dari no pin 1,2,3,4 (kembali dalam kondisi asli)
5. sekarang printer sudah di reset. kalau jadi ditutup yang bener ya bro!!

Catatan: Metode ini tidak dianjurkan untuk pemula jadi anda harus memahami apa yang Anda lakukan.Semua masalah yang disebabkan oleh tutorial ini bukan tanggung jawab kami. Gunakan tutorial ini sebagai risiko Anda sendiri.

Resetter Epson T20 Adjustment Program Epson T20

Cara Reset Epson Stylus T20 secara Software " TERBARU "

1. Langkah pertama tentunya printer harus sudah terinstall drivernya. Untuk Download drivernya klik download driver epson .

2. Download software resetter Epson T20 dulu. Software bernama Resetter Epson Stylus T20, anda dapat download di sini Klik

3. Tanggal komputer tidak perlu dirubah seperti resetter sebelumnya.

4. Jalankan program resetter Epson T20 dengan double klik "AdjProg.exe"

5. Kemudian ikuti gambar berikut ini :











Semoga membantu.....

cara reset printer brother

Reset all models of Brother Printers

Applicable for all models of Brother Printers. Sorry, I still not yet tried this method because very difficult to get Brother Printer, this is possible cause of the printer is not popular printer. For everyone that having Brother Printer, I hope this post can assist your.

1. Disconnect the power cord from your Brother Printer.
2. Press Set button, while holding the Set button re-connect the power to your printer
3. The Error code will be display “Machine Error 46″
4. If the Error code appear, press the “arrow up button” ( ^ ) there will be numbers that are going to be display.
5. Choose 8 then press Set Button
6. Press Arrow Up button again then choose Zero (0) and press Set Button Again, now you will enter Service Mode.
7. Press “Mono Key/Button” 25 times or until “Purge Counter Appear”
8. Now press arrow up (^) again then choose “2″ press Set Button
9. Press Arrow Up (^) again then choose “7″ press Set Button
10. Press Arrow Up (^) again then choose “8″ press Set Button
11. Press Arrow Up (^) again then choose “3″ press Set Button
12. The purge counter will be reset to Zero.
13. Now Press Stop/Exit Button
14. You will return to Machine Error 46
15. Press Arrow Up (^) then choose 9 press Set Button
16. Press Arrow Up (^) again then once more choose 9 press Set Button
17. Your Printer will reset then wait until it power up again.
sumber: indoreset yahoo group

Resetter canon MX300

Canon Pixma MX300 is one of the Inkjet multifuction (Print, Scan, Copy, Fax) printer from Canon. Like general case of printer, after filled by ink usually ink level not full. At some cases of printer, after ink level empty, printer cannot be used to print.

Here the Solution to reset the ink level for Canon Pixma MX300 follow this steps to reset the ink level in your canon MX300.

1. Switch off the Canon MX300 and disconnect the power cable.
2. While press and hold the power button, Connect the power cable to electric socket.
3. While pressing the power button, press the “Cancel/Stop” button (red button).
4. Now release the power button and the printer turns into a kind of factory mode. Wait for 10 seconds until it says “idle”.
5. Press “>” (next button) once “Shipping Mode 3″ then Press the “OK” button. Press “OK” again for “without cleaning”.
6. A test page will print.
7. Open the cover, like you are about to change the cartridges.
8. Disconnect the power cable again without switch off the printer.
9. Take out the both cartridges.
10. Close the cover.
11. Connect the power cable and turn on the printer.
12. Now just put the cartridges back and the ink level in the canon Pixma MX300 have full again.

Resetter HP4000,4050,4100,5000,4500,4550

Printers HP 4000, 4050, 4100, 5000 Message Reset Methods

* Turn the printer off
* Hold down the left side of the ITEM and VALUE +/- keys
* turn the printer on and wait until RESET MAINTENANCE COUNT is displayed
* then release the keys

Printers HP 4500, 4550 Message Reset Methods

* Turn the printer off
* Hold down the CANCEL JOB and SELECT keys and turn the printer on, then wait until the display goes blank and the three LED’s come on
* Press the right side of the MENU key, then press the SELECT key
* You will enter SERVICE MODE after the normal test completes
* Press the ITEM key until the FUSER MAINTENANCE COUNT appears
* Press VALUE +/- to change to zero
* Press SELECT to save
* Press GO; the printer should return to READY

Reset the maintenance count on an HP Laserjet 4200, 4300, 9000 4250, 4350, and 2400

* Turn the Printer on.
* Press and hold down the checkmark (Select) button while the memory is counting. The memory starts counting at 000MB immediately after you turn the power on. (Note: on laserjets 4200, 4300, 9000 you can hold down the checkmark button as you turn the power on, then wait for the three LEDs to illuminate. On the laserjets 4250, 4350, and 2400 series you need to wait until youturn the power on and the memory starts counting before you hold the checkmark button.)
* Continue to hold down the checkmark (Select) button until all three LEDs are illuminated.
* Release the checkmark (Select) button.
* Press the up arrow (Navigation) button until the message New Maintenance Kit appears on the control panel display.
* Press the checkmark button once.
* A message New Maintenance will appear in the control panel display and the printer will reset.

Reset Methods for HP Printers 8000, 8100, 8150

* Press the MENU button until the display reads CONFIGURATION MENU
* Press the ITEM button until the display reads SERVICE MESSAGE = ON/OFF
* Select OFF*
* Press SELECT to save
* Turn printer off
* Hold the VALUE MINUS and ITEM MINUS buttons while turning the printer back on Hold buttons down until
* display reads RESET MAINT/COUNTand then release both buttons

Resetter epson T11

Cara Reset Epson Stylus T11 secara Software

1. Langkah pertama tentunya printer harus sudah terinstall drivernya. Untuk Download drivernya klik download driver epson
2. Download software resetter Epson T11 dulu. Software bernama Resetter Epson Stylus T11, anda dapat download di sini Klik
3. Jalankan program resetter Epson T11 dengan double klik "Loader.exe", jangan langsung di "AdjProg.exe" karena program tidak akan berjalan kalau langsung dari "AdjProg.exe"
4. Kemudian ikuti gambar berikut ini :













"Check : digunakan untuk cek counter yang maksimal 7800 point, anda dapat melihatnya di main pad counter. Kalau lebih atau mendekati 7800 point berarti printer perlu di reset"

"Initialization : digunakan untuk mereset atau mengenolkan kembali counter printer"


5. Setelah selesai matikan printer kemudian nyalakan lagi. Printer akan nyala dengan lampu berwarna hijau penuh. Berarti printer Epson Stylus T11 yang blink tadi sudah siap digunakan kembali.

Resetter ini juga bisa digunakan untuk T10

SELAMAT MENCOBA!!

Resetter Epson TX110 - TX111

1. Langkah pertama tentunya printer harus sudah terinstall drivernya. Untuk Download drivernya di sini
2. Download software resetter Epson TX110 - TX111 download
3. Jalankan program resetter Epson TX110 - TX111 dengan double klik "AdjProg.exe"
4. Kemudian ikuti gambar berikut ini :













5. Setelah selesai matikan printer kemudian nyalakan lagi. Printer akan nyala dengan lampu berwarna hijau penuh. Berarti printer Epson Stylus TX110 - TX111 yang blink tadi sudah siap digunakan kembali.
Selamat mencoba ya...

Resetter Epson CX5500

Resetter Epson CX5500

Bang..bang printerku kenapa ya? kok lampunya cuman kedap kedip, printer gak mau jalan.Setelah dilihat eh ternyata cuman perlu di reset.Gimana caranya neh? okey,berikut ini saya sampaikan caranya:
1.Langkah pertama tentunya printer harus sudah terinstall drivernya. Untuk Download drivernya di siniklik download driver epson .
2.Download software resetter Epson CX5500 klik di sini
3.Jalankan program resetter Epson CX5500 dengan double klik "ServiceFT.exe"
4.Kemudian ikuti gambar berikut ini :






5.Setelah selesai matikan printer kemudian nyalakan lagi.Printer akan nyala dengan lampu berwarna hijau penuh tidak kedip hijau merah lagi.Berarti printer Epson Stylus CX5500 sudah siap digunakan kembali.

Selamat Mencoba..moga berhasil

Resetter

Resetter Canon IP1900
Pada dasarnya mereset printer seri ini sama dengan IP1800/1700. download di sini

Resetter Canon iP1000, Canon iP1200, Canon iP1300, Canon iP1500, Canon iP1600, Canon 1700,Canon iP2200, Canon iP3000, Canon iP4200, Canon iP5200. Reseter ini sudah pernah dan sering digunakan.

Service Mode

Canon PIXMA iP1000, iP1500 Waste Ink Counter Reset

Step 1: Manual for Service mode

1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

step 2 : Using Software Resetter for Permanant

1. Reconnect the printer cable.
2. Download

* General Tools software Resetter for canon Pixma iP 1500 download di sini

* General Tools software Resetter for Canon PIXMA iP1000 Printers download di sini
3. Run the Software Resetter and select (USB PORT)
4. Choose SET DESTINATION 1 And it should be reset.

Remark “After service mode Pls use software for permanent reset”

Canon Pixma iP1200, iP1600, iP2200 Resetter


1. Download software for Canon iP1200, iP1600, 2200 Printers. download di sini
2. Unzip downloaded file by WinZip, 7Zip, Izarc, etc
3. Run GeneralTool.exe
4. Select the connected USB port number from USB PORT
5. Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
6. In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.

If both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters.

Resetter canon iP 1700 and iP1300

Methode 1 : Reset Hardware

1. Turn off Canon Pixma iP1700, iP1300 Printers
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the Canon Pixma iP1700, iP1300 Printers should turn off, if not, press the Power button once more.
8. Your Canon Pixma iP1700, iP1300 Printers should respond as normal

Methode 2 : Using software resetter


1. Download Software Resetter for Canon Printers iP1300 dan iP1700 download di sini
2. Ekstrak/Unrar/Unzip the Software
3. run GeneralTool.exe
4. Select USB Port where the canon ip1300 or canon ip1700 installed.
5. CLick Lock Release button
6. Select EEPROM CLEAR
7. Click Test Pattern 1 button
8. Your Canon Pixma iP1700, iP1300 Printers should respond as normal.

Resetting Ink-Waste Overflow Counter Canon Pixma iP3000, iP4000, iP5000 Printers

1. With the printer plugged in and powered off, press and hold the Resume/Cancel button, then press and hold the Power button. (DO NOT release the buttons. The LED light should be green to indicate that a function is selectable.).
2. While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.).
3. While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.).
4. When the LED light is green, press the Resume/Cancel button 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.).
5. Press the Power button. The LED lights in green, and the reset is performed. (When the operation completes, the printer returns to the menu selection mode automatically.).
6. Press the power button to exit service mode.

Note: if you accidentally press the Resume/Cancel button more than 4 times in step 4 then just press the Resume/Cancel button at least 10 times and the printer will be returned to step 4 automatically

Canon Pixma iP4200, iP5200, iP6000, iP8500 Reset Procedure

1. Turn off the Printers.
2. Hold Resume button click POWER.
3. Hold button RESUME, release POWER
4. Then press the button again twice RESUME.
5. Release all the buttons.
6. Indicator led in green and stay green.
7. Click the button 4 times RESUME, if you want to make another transaction. :

Look at the table below:

* 1 led- Orange – Service test print 1 times – Orange – Service test print
* 2 led – Green – EEPROM information print 2 times – Green – EEPROM information print
* 3 led – Orange – EEPROM initialization 3 times – Orange – EEPROM initialization
* 4 led – Green – Waste ink counter setting 4 time – Green – Waste ink counter setting
* 5 led – Orange – Destination setting (Press Power > Press Resume 3x) 5 times – Orange – Destination setting (Press Power> Press Resume 3x)
* 6 led – Green – Print head deep cleaning 6 times – Green – Print head deep cleaning
* 11-13 led – Orange, Green, Orange – Return to menu selection
* 14 led – Green – Left margin correction 14 times – Green – Left margin correction

1. Turn off the printer POWER button.

Resetter Epson Tx100 TX105unduh di sini
-Epson TX200 TX209unduh di sini
-Resetter Epson Rx590unduh di sini

Untuk seri-seri yang lain silahkan klik langsung pada serinya di bawah ini:
-RX610
-RX690
-R1900
-R1390
-R1410
-C79